Accesories and spare parts 

Complete air filter (cover, filter, internal mechanism and support) for ozeam 2.5hpPRO and Honda GX50 engines.

Aluminum rear cylinder cover for Ozeam 2.5hp-2.5hpPRO and Honda GX50 engines

Fuel tank cap for Ozeam 2.5hp-2.5hpPRO

Motor seal for Ozeam 1.3hpPRO-2.5hpPRO

Tail for Ozeam 1.3hpPRO-2.5hpPRO

6 propeller shaft safety pin units for Ozeam 1.3hpPRO-2.5hpPRO

Throttle cable for outboard motors Ozeam 1.3hp-2.5hp-- and Aquaparx 1.2hp y Ocean Bay F1.5hp

Starter handle valid for outboard motors Ozeam 1.3hp-1.3hpPRO and Aquaparx 1.2hp y Ocean Bay F1.5hp

Hose set 2 colors gasoline for outboard motors Ozeam 1.3hp-1.3hpPRO-2,5hp-2.5hpPRO and Aquaparx 1.2hp y Ocean Bay F1.5hp

Cover yellow yellow housing valid for outboard engine Ozeam 1.3hp and Aquaparx 1.2hp y Ocean Bay F1.5hp

Complete universal inflation valve for all types of inflatable boats, semi-rigid, zodiac or any inflatable accessory.

Hooks made of PVC for all types of inflatable boats, boats, rafts and inflatables.

It has a width of 108cm, the width can be opened or closed about 5cm, therefore if the separation between the floats measuring from the center of the float is from 1m to 1,20m approx, it can be worth, it has a base that should be stuck in The float of the boat so it is not necessary to be right in the center of the floats.

Spark plug for Ozeam 1.3hp-1.3hpPRO y Aquaparx 1.2hp y Ocean Bay F1.5hp

These wheels can be mounted on aluminum, wood or plastic boats whose transom is at least 23 cm high. You give a better stop and you can transport your boat better. On the other hand, it is practical that you can fold the wheels and so are also space-saving.  Aluminum construction 40 mm Total length about 640 mm / hinged Wheels 225 mm diameter Payload 135 kg

Fuel tank for ozeam 5.5hp 4 stroke, models OZM5.5-4 V1

Fuel tank cap for ozeam 5.5hp 4 stroke, model OZM5.5-4 V1 and V3

Speed control for ozeam 5.5cv 4 stroke, model OZM5.5-4 V1

!!! COMPLETE WOODEN FLOOR COMPATIBLE ONLY WITH THE BOAT: OZEAM 360Full Nautical Wood Floor with non-slip surface. At the time of storage can be disassembled into four pieces, that is, we are facing a wooden floor Continuous and folding, for storage easier and less bulky.

24 LITER PORTABLE GASOLINE TANK WITH HOSE AND KNOBIt is suitable for all OzeaM motors from 6cv onwards.THE DEPOSIT MEASURES ARE 45 x 33 x 26cm.THE LENGTH OF THE HOSE WITH KNOB IS 3.10m.

This high pressure air compressor pump can easily inflate rubber boats and many other inflatable products such as kites, mattresses, tents, etc.

OZEAM pressure gauge for all types of inflatable boats, boats, rafts, and inflatables that have the same type valve as OZEAM inflatable boats.

NGK Spark plug for Ozeam 6cv & Ozeam 8cv

Complete air filter (cover, filter, internal mechanism and support) for ozeam 2.5hp

Complete air filter (cover, filter, internal mechanism and support) for ozeam 5.5hp 4 stroke, OZM5.5-4 V3

Clutch valid for outboard motor Ozeam 2.5hp

Carburettor for Ozeam 20hp and Ozeam 25hp

Impeller for Ozeam 6cv and Ozeam 8cv

!!! COMPLETE WOODEN FLOOR COMPATIBLE ONLY WITH THE BOAT: OZEAM 200 Full Nautical Wood Floor with non-slip surface. At the time of storage can be disassembled into three pieces, that is, we are before a wooden floor Continuous and folding, for an easier storage and less bulky.