Inflate Boat 

It has a width of 108cm, the width can be opened or closed about 5cm, therefore if the separation between the floats measuring from the center of the float is from 1m to 1,20m approx, it can be worth, it has a base that should be stuck in The float of the boat so it is not necessary to be right in the center of the floats.

High pressure inflatable floor, built in three layers PVC canvas, 1.2mm and 1100D, once swollen is very stiff, resembling a paddle surf since the type of construction is similar, resistant to shoes, fishing boxes, etc ... THIS IS FOR THE OZEAM OF 3.6M (NO VALIDO PARA LAS SL360SL, SL360ALU NI SL360AD), see the floors for other lengths.

A pair of detachable oars 132cm long

These wheels can be mounted on aluminum, wood or plastic boats whose transom is at least 23 cm high. You give a better stop and you can transport your boat better. On the other hand, it is practical that you can fold the wheels and so are also space-saving.  Aluminum construction 40 mm Total length about 640 mm / hinged Wheels 225 mm diameter Payload 135 kg

Complete universal inflation valve for all types of inflatable boats, semi-rigid, zodiac or any inflatable accessory.

PVC folding bearing made of PVC for boats of small, medium and large size.Completely smooth and easy to install. Valid for PVC, Polyurethane, Rubber and Hypalon Neoprene boats.

Hooks made of PVC for all types of inflatable boats, boats, rafts and inflatables.